
Policy Development for Clean Energy Technology
Informing and supporting governments in clean energy and energy-efficient technology policy development
- Overview
Governments are best supported in energy policy when recommendations are grounded in real facilities, real consumption data, and technical solutions that have been designed for their actual needs. Our approach is therefore practical: we build a working relationship with a government entity, study how it uses energy, deliver a technical study, and turn the lessons learned into guidance that policymakers can apply to similar facilities.
This report summarizes how we applied that approach with the Food Security Sector, and what it shows about developing clean energy and energy-efficiency policy.
- Our Engagement with the Food Security Sector
We established a direct working relationship with the Food Security Sector and prepared a full technical study of a hybrid solar system for its food storage and administrative buildings on the Cairo–Belbies Desert Road. The goal was to reduce electricity costs while keeping critical operations, especially refrigeration, reliably powered.
Before proposing any technology, we worked to understand how the Sector actually uses energy:
- Consumption and bills: we analyzed a full year of electricity bills and monthly consumption to identify the load pattern and the high-demand months.
- Critical loads: we mapped the equipment that cannot be interrupted, such as refrigeration units, cold rooms and freezers, which run 24 hours a day, along with pumping motors.
- Non-critical loads: we separated out the administrative loads (air conditioning, lighting, offices and fans), which can be served directly by an on-grid system.
- Site conditions: we assessed the available roof area, tilt angle and south orientation to size the system realistically.
- Key Findings from the Study
| Annual electricity consumption | 1,372,900 kWh |
| Annual electricity cost (2024 bills) | 3,243,995 EGP |
| Critical refrigeration and motor load | 234 kW (318 HP) |
| Proposed PV capacity | 613.5 kW (about 6,000 m² of roof area) |
| Expected annual production | 993,870 kWh |
| Expected annual saving | 2,534,368 EGP |
| Expected CO₂ emission saving | 496,935 kg CO₂e |
| Share of consumption covered by solar | About 72% (grid covers the remaining 28%) |
- The Proposed Solution
We recommended a hybrid design that matches each part of the system to the type of load it serves:
- Off-grid system for critical loads (324.3 kW): solar pumping inverters feed the refrigeration loads, cold rooms and freezers directly from the PV array, so food storage stays protected.
- On-grid system for administrative loads (289.2 kW): grid-tied inverters supply air conditioning, lighting and offices, with a smart logger for monitoring.
- Utility grid as backup: the grid remains the main source at night and the backup source during the day, which keeps the supply secure.
- Lessons for Government Clean Energy Policy
The experience with the Food Security Sector points to several practical policy directions that governments can adopt:
- Start with data. Mandatory or supported energy audits of public facilities give decision-makers a clear picture of where energy is used and where savings are largest.
- Prioritize critical loads. Policy for facilities such as food storage, hospitals and water pumping should treat supply security and clean energy together, using designs that protect essential operations.
- Use public buildings as demonstrators. Large, well-documented projects in government facilities show measurable cost and emission savings and build confidence for wider adoption.
- Set clear technical and procurement standards. Minimum requirements for equipment quality, warranties (for example, 25 years for PV modules and 5 years for inverters), monitoring and local content help ensure reliable, long-lasting systems.
- Support flexible financing. Staged payment terms and cost-saving metrics such as payback period make solar projects easier for public bodies to approve.
- Track results. Monitoring energy produced, money saved and emissions avoided lets governments measure progress against their clean energy targets.
- Conclusion
By working directly with the Food Security Sector, studying its consumption, and designing a hybrid solar solution around its critical and administrative loads, we showed how technical support can feed directly into policy: evidence from real facilities, clear priorities, and measurable results. We are ready to continue supporting government entities in developing and implementing clean energy and energy-efficient technology policies.
- Full Study
To view the complete technical study, please use the following link:
https://drive.google.com/drive/u/1/folders/1R2iaA6-xazsomYel4XmZKVlvL4PGnsUV
