HU Energy Efficiency Report

ENERGY EFFICIENCY

INITIATIVES & ACTION PLAN
 

1. Introduction

 

Heliopolis University for Sustainable Development is pursuing practical measures to improve the energy performance of its buildings and reduce the electricity required for space cooling. As part of this direction, the University has begun exploring and applying passive design approaches that reduce heat gains before relying on mechanical cooling. The initiatives described in this report form an initial, practical step towards a broader campus energy-efficiency plan.
 

2. Ventilated Roof: Initial Application

 

The University has begun adding extra floors to its existing buildings and is relying on a ventilated-roof concept in this work. The approach introduces an air cavity between the external roof layer and the layer below it. When appropriately detailed, ventilation openings allow heated air within this cavity to escape and be replaced by cooler air. This helps limit the amount of solar heat transferred to the occupied spaces beneath the roof.

This passive-cooling measure is intended to reduce indoor heat gains and, consequently, the cooling load and operating hours of air-conditioning systems. Its actual energy benefit will depend on the roof construction, cavity depth, ventilation openings, insulation, weather conditions and building operation. The measure is therefore being treated as an energy-efficiency intervention whose performance should be assessed through monitoring, rather than as a guaranteed replacement for air-conditioning.
 

3. Exploring Compressed Earth Blocks

 

In parallel, the University has started exploring the use of compressed earth blocks (CEBs) as a potentially more sustainable building material. These blocks are produced by compressing a carefully selected and prepared soil mixture in a mould. Depending on their composition, density, dimensions and wall design, earth-based blocks can provide useful thermal mass. This can slow down heat transfer and moderate indoor temperature fluctuations.

The thermal performance of compressed earth blocks is not determined by the material name alone. It depends on properties such as thermal conductivity, heat capacity, moisture behaviour and wall thickness, as well as the local climate and the availability of night-time ventilation. For hot-climate applications, the University will therefore consider the blocks as part of a complete wall system and assess whether additional insulation or other design measures are required.

 

4. University Workshop and Knowledge Transfer

 

To build practical knowledge before moving towards wider application, the University organised a workshop on compressed earth blocks. Specialised technicians with direct experience in this field were invited to share their technical knowledge, production practices and practical lessons. This provided an opportunity for the University community to learn from hands-on expertise, discuss the material’s potential applications and understand the considerations involved in producing and using compressed earth blocks.

See the workshop here:

Share this post